HSS Twist Drill Bit
We are experience HSS Twist Drill Bit manufacturer, supplier, exporter, factory in Taiwan. Due to better satisfy the needs of customers, we will keep on promoting our skills of products and good service to all of them.
HSS Twist Drill Bit
Model - WHTD-1
HSS TWIST DRILL BIT
WHTD-1
Description:
Apply to wood & steel construction
Suitable for wood 、metal、cooper,and stainless steel
Eject chips easily, speed up drilling and increase durability
Fast drilling in every material with a beautiful hole
Other spec available by request
WHTD-1
- Material: HSS 4241 , M2 , M35
- Size : A: Shank 6.35mm impact , Diameter:1.0~13.0mm , L:30~82mm
B: Round shank , Diameter:1.0~13.0mm , L:12~101mm - Head:118°~135°
- High quality
- Origin: TAIWAN
- Packing: slider card, 12pcs/Box,120pcs/CTN/13kg/14kg/1.2'
Description:
Apply to wood & steel construction
Suitable for wood 、metal、cooper,and stainless steel
Eject chips easily, speed up drilling and increase durability
Fast drilling in every material with a beautiful hole
Other spec available by request
We are confident to meet the requirements of all customers with reasonable prices, punctual shipment, and strict quality control. If you are interested in
HSS Twist Drill Bit
, our company is your best choice. Do not hesitate to contact us. Looking forward to your enquiry.Enquiry Now
Products List
POCKET HOLE JIG KIT (PATENT)
WF-MP2HK
Material: Drill: HSS steel, Bit :S2 , Screws : steel
High quality
Origin: TAIWAN
Packing:Black P.P Box + clear cover + sleeve card, 20set/CTN/15.2kg/18kg/1.8'
Contents:
Twin holes jig
3/8” Hss Step Drill Bit
Square Driver 150mm Bit No.2 Robertson
Depth Stop Collar
Allen Wrench
10pcs-#7×1” Coarse Square Driver Screws with Pan-Head
10pcs-#8×1-1/4” Coarse Square Driver Screws with Washer-Head
10pcs-#8×1-1/2” Coarse Square Driver Screws with Washer-Head
10pcs-#8×2” Coarse Square Driver Screws with Washer-Head
10pcs-#8×2-1/2” Coarse Square Driver Screws with Washer-Head
Description:
Pocket hole jig system of Twin holes
High hardened plastic body parts
High hardened metal drill guide
Easy to use and quickly remove for install
Adjust for wood materials from 1/2” to 1-1/2”
Top side magnetic of steel C clamp
Easy to set drill depth and tighten
Pocket hole joinery is a way of making strong,hidden joints by drilling a hole at an angle of 15 degrees.
These joints are fast and easy to produce. Simply drill a hole a into one work piece,
then join it to a second work piece with a self-tapping screw. Because the screws act
as an internal clamp holding the joint together, glue is unnecessary (but usually
recommended ) for most common joints.
Compared to the traditional joinery methods of dowel or mortise and tenon joints,
pocket hole joints;Require only one hole to be drilled, eliminating the need to
precisely line up mating work pieces. Do not require any complex mathematics or
measurements. Because pocket-hole joinery doesn’t require access to the inside of the joint,quick repairs are possible without completely disassembling the joint.
Fixing a squeaky chair or strengthening furniture requires only the drilling of additional pocket holes, and the use of screws to pull the two pieces together.
COUNTERSINK BIT
WCSB-1
Material: TCT & Alloy (Apply to wood & steel construction)
Size : TCT: D:Diameter:2.4~4.5mm , D1:10 & 11mm
Aooly:D:Diameter:2.4~4.5mm , D1:8 & 11mm
High quality
Origin: TAIWAN
Packing: slider card, 12pcs/Box,120pcs/CTN/14kg/15kg/1.2'
Description:
TCT Type - Multi-purpose
Suitable for:
- Metal construction materials: Aluminum, Iron, Steel, Cooper, etc.
- Hard construction materials: Acetal resin, calcium silicate, plasterboard, etc.
- Wooden construction materials: Hardwood, plywood, Continuous layer board, Bamboo, etc.
Alloy Type
Suitable for wooden construction materials Hardwood, plywood, Continuous layer
board, Bamboo, etc.
Faster drilling, smoother cut, Multiple usage
New design 4 TCT cutting edges upgrade for all kinds of metal and hard construction materials
Adjustable ring position easy and precise hole depth control countersink parts more clean, smooth ,no-burr edge
MASONRY REBAR CUTTER
WMRC-1
Material: Tungsten steel
Diameter:10/13/16/19/22/25/28mm (other diameter available by request)
O/L: 305mm
F/L:84mm
Coating: Sandblasting
Shank: SDS Plus
High quality (special design for professionals)
Origin: TAIWAN
Packing: slider card, 12pcs/Box,120pcs/CTN/14kg/15kg/1.3'
Description:
Powerful cutting: Cut through rebars fast and effortless
Excellent welding: prevent falling/broken tooth
Efficient chip ejection: Ejection holes and well- designed flute
HOLE SAW
WHS-1
Material: Tungsten carbide, Alloy steel
Size:
Tungsten carbide hole saw: Diameter:54/60/80/100mm, Depth:40mm,O/A:100mm
Alloy steel hole saw: Diameter:54/60/80/100mm, Depth:40mm,O/A:100mm
High quality
Origin: TAIWAN
Packing: slider card, 12pcs/Box,120pcs/CTN/16kg/17kg/1.4'
Description:
Dual cutting edge pilot drill, fast drilling ,prevent accumulating chips
Sharp tungsten teeth, faster drilling,50% more efficient than flat type
Tungsten carbide hole saw-
Application: Door lock, table line hole, drain or A/C hole, downlight
Material: Hardest wood door, plastic door, hardness fire resistant building material, concrete fiberboard, plasterboard, calcium silicate board.
Alloy steel hole saw-
Application: Door lock, table line hole.
TWIST TYPE ADJUSTABLE HOLE CUTTER
WTAH-1
Material: TCT Blade/ Alloy Blade
Size : 40mm-200mm Adjustable cutting rang
High quality
Origin: TAIWAN
Packing: slider card, 12pcs/Box,120pcs/CTN/15kg/16kg/1.3'
Description:
Replaceable blade & drill
TCT blade/ TCT center drill for ceramic siding/FDR/wood
Ally blade /HSS center drill for hardwood/ structural plywood
Shank option: Straight / 6.35 impact /SDS plus
TAP DRILL BIT SET
WTDB-01
Material: M2, Surface treatment & Matel finish , Body: Shank 6.35mm
Size: OL:55mm - M3×0.5mm, M4×0.7mm, M5×0.8mm, M6×1.0mm, 6-32NC,8-32NC
10-24NC, 10-32NC
OL:60mm - M8×1.25mm, M10×0.5mm, 12-24NC,1/4”-20NC,
1/4”Bit Holder w/magnet
High quality
Origin: TAIWAN
Packing: Plastic Box+ color box + shrink 25sets/Box,50set/CTN/15kg/16kg/ 0.87'
Description:
Drilling, tapping, and deburring-three processes are solved one time.
Effectively improve work efficiency, no need to replace accessories.
Suitable for common metals such as aluminum , brass copper etc.